LOWENERGIE 6A illuminated timer switch rundown time lag energy saving, 12sec-12min adjustable 2 Wire

The 6A Illuminated Timer Switch offers a convenient and energy-saving solution for controlling lights or other electrical devices. With an adjustable time lag of 12 seconds to 12 minutes, this switch allows users to customize their preferred duration. One of the frequently asked questions is whether the switch can handle both a light and an extractor fan simultaneously. According to the product's FAQ section, as long as the total load does not exceed 15 amps, using a light and a domestic extractor fan together should be possible. Another common inquiry is whether the switch can be used in a 2-way setup with 3 core cable t&e. Unfortunately, it seems that the switch only has two terminals, meaning it does not support a 3-way connection. Regarding compatibility with LED lights, the switch is said to work fine with LEDs, but there is a chance of flickering or dim glows when the switch "times out." However, this issue can be rectified by wiring a Power Correction Factor Capacitor across the LED lamp. The switch needs to be installed in a back box or a surface-mounted (patress) box as it replaces an existing light switch. One customer asked if the switch can be used in a staircase scenario, with one switch at the top and one at the bottom, both controlling the same lights. The answer given suggests that these switches are not suitable for this application as they lack the functionality of a 2-way switch. The standby energy Consumption of the switch is unknown as it is not mentioned in the instructions. However, it is expected to be very low, with the only power used in standby being for the LED light around the button. Unfortunately, the switch is not suitable for use in a bathroom, as it does not have the necessary IP rating. In summary, the 6A Illuminated Timer Switch offers a convenient way to control lights and electrical devices while providing energy-saving benefits. It has an adjustable time lag and is compatible with LED lights, although some flickering may occur. However, it does not support a 2-way setup and is not suitable for use in a bathroom.